As we prepare for the migration from on-premises Skype for Business to Skype for Business Online, there are a few important considerations to bear in mind before you take the leap. I will be covering these in a series of posts (hopefully), today I want to share with you a common scenario we will face while preparing for migration.
We are well aware of the pre-requisite for Office 365 that demands an Active Directory synchronised user must have a publically routable User Principal Name (UPN). So critical is this requirement that it is now engrained in every consultant’s mind and increasingly customers are becoming more aware of this without us even mentioning it. However, this can often produce its own unique challenges.
Many organisations set their users up with an ambiguous username, something that does not immediately identify a user by name e.g. firstname.lastname@example.org rather than email@example.com. This is to avoid name conflicts and was often used as an additional domain security measure. When a user is synchronised to Office 365 their UPN is used to provision the identity and service addresses for Exchange and Skype for Business. Often the case is that users UPNs do not match their publically available contact information such as their e-mail address. E-mail addresses are usually more personable to each users and contain their true identity e.g firstname.lastname@example.org. In order to integrate Skype for Business Online with Exchange properly it is important that the user’s SIP address matches their primary e-mail address i.e. email@example.com and not firstname.lastname@example.org.
However, when you perform an AD Sync with Office 365 the user’s Skype for Business Online identity is provisioned using the UPN like so:
On-premises Identity (UPN = email@example.com)
Synchronised Identity in Office 365 Portal also firstname.lastname@example.org
PowerShell output showing primary SIP Address in Skype for Business Online
In order to change this, the solution is to look and edit the on-premises identity, as this is the source of authority for this person’s cloud identity. Specifically, we need to modify an attribute on the user’s Active Directory account called msRTCSIP-PrimaryUserAddress. In order to find this attribute, your on-premises Active Directory domain is required to be prepared for Lync / Skype for Business On-premises. Therefore, you may need to download the on premises software and run AD schema preparation to have this property available. I say may read on.
First change find and change this attribute
Click on edit and enter the desired address in this format: sip:email@example.com
Perform directory synchronisation using AADSync and then check the SIP Address of the online identity. You should see that is has changed
Please note that this only works for synchronised identities. Cloud identities must be provisioned with the primary SIP address as the username.
If you have not prepared your Active Directory domain from on-premises Lync / Skype for Business and do not have the msRTCSIP-PriamryUserAddress attribute, there is an alternative method you can use. Instead we can use the ProxyAddresses attribute that is natively part of Active Directory. This attribute is the same on you use for provisioning e-mail addresses to get around the same issue as we have. Open the ProxyAddressess attribute and add a new Proxy Address into the list using the following format: sip:firstname.lastname@example.org
Perform a directory synchronisation and test the SIP address has been updated correctly
Mark is an Independent Microsoft Teams Consultant with over 15 years experience in Microsoft Technology. Mark is the founder of Commsverse, a dedicated Microsoft Teams conference and former MVP. You can follow him on twitter @UnifiedVale